
Single Phase Filter
General purpose filter wih IEC connector
High ratio of performance to cost moke
We have our own production base to ensure the production and quality standards of our 3386 Trimming Potentiometer, Two-stage Differential Mode EMI Filters, Pulse Suppression EMI Filter, and our business is thriving after years of unremitting efforts. Go on to boost, to be certain item quality in line with market and buyer standard demands. We sincerely welcome customers all over the world to contact us for business cooperation.
Product Description
This kind of IEC Inlet EMI Filter is mainly a passive filter composed of resistors, capacitors and inductors, without active components like transistors. The principle of the it is an impedance matching network. The greater the impedance adaptation between the input and output sides and the power supply and load side, the more effective the attenuation of electromagnetic interference is. In addition, the IEC Inlet EMI Filter can effectively filter out the frequency of a specific frequency in the power line or the frequency outside certain range to obtain a power signal of a specific frequency or eliminate the power signal after a specific frequency. Besides, it has the advantages of high quality, small volume, compact structure, easy installation, delicate design as well as durability. The IEC Inlet EMI Filter is widely applied in electric appliances.
Applications
Available for mini-electronic equipments and measuring instruments.
Technical Data
| Rated Voltage | 115/250VAC |
|
Line Frequency |
50/60Hz |
|
Test Voltage |
1500VDC (line/line) |
|
1500VAC (line/ground) |
|
|
Insulation Resistance |
>50MΩ@500VDC |
|
Temperature Rise |
<30℃ |
|
Climatic Category |
25/085/21 |
List Of General Products
|
Part No. |
Rated Current |
Leakage Current |
Dimension |
Terminal |
Electrical Schematics |
|
|
Input |
Output |
|||||
|
DAI1-1A |
1A |
<0.5mA |
I1 |
|
|
|
|
DAI1-3A |
3A |
<0.5mA |
I1 |
|
|
|
|
DAI1-6A |
6A |
<0.5mA |
I1 |
|
|
|
|
DAI1-10A |
10A |
<0.5mA |
I1 |
|
|
|
|
DAI2-1A |
1A |
<0.5mA |
I2 |
|
|
|
|
DAI2-3A |
3A |
<0.5mA |
I2 |
|
|
|
|
DAI2-6A |
6A |
<0.5mA |
I2 |
|
|
|
|
DAI2-10A |
10A |
<0.5mA |
I2 |
|
|
|
|
DAI3-15A |
15A |
<2.0mA |
I3 |
|
|
|
|
DAI4-20A |
20A |
<2.0mA |
I4 |
|
|
|
Outine Drawing And Dinemsions(mm)

Insertion Loss
(Common Mode)--------(Differential Mode)

We always consider the needs of customers as our quest, and try our best to provide wholeheartedly high-quality Single Phase Filter and first-rate services to customers at home and abroad to create a brighter future. We're confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. On the one hand, we always put product innovation at the top of business operations, and on the other hand, we continue to learn from advanced management concepts and methods at home and abroad.
You Might Also Like
Send Inquiry



































