3 Phase 3 Wire High Performance EMI Filter
High performance filters
The filters of two CM sections plus one DM section
Can provide good performance in suppressing both CM and DM noises
Product Description
This kind of 3 Phase 3 Wire High Performance EMI Filter can effectively reduce the electromagnetic interference of the inverter and has EMI noise suppression capability. It is usually installed at the outlet end of the inverter to prevent electromagnetic interference generated by the device itself from entering the power line, and also prevent interference on the power line from entering the device. In addition, the 3 Phase 3 Wire High Performance EMI Filter can improve the EMC environment, improve system reliability, reduce harmonic components in the output current, and suppress surge voltage and electromagnetic interference on the output side of the inverter. What's, more, it has the advantages of high performance, compact structure, simple installation, low failure rate, sophisticated design as well as durability. It is widely applied in three phases, three lines series power supply equipment.
Technical Data
| Rated Voltage | 250/440VAC |
|
Line Frequency |
50/60Hz |
| Test Voltage | 1500VDC (line/line) 2250VDC (line/ground) |
|
Insulation Resistance |
>200MΩ@500VDC |
|
Temperature Rise |
<30℃ |
|
Climatic Category |
25/085/21 |
List Of General Products
|
Part No. |
Rated Current |
Leakage Current |
Dimension |
Terminal |
Electrical Schematics | |
|
Input |
Output |
|||||
|
DDC4-10A |
10A |
<3.0mA |
C4 |
|
|
|
|
DDC9-20A |
20A |
<3.0mA |
C9 |
|
|
|
|
DDC6-50A |
50A |
<4.0xnA |
C6 |
|
|
|
|
DDC7-100A |
100A |
<20mA |
C7 |
|
|
|
|
DDC8-150A |
150A |
<20mA |
C8 |
|
|
|
|
DDC8-200A |
200A |
<20mA |
C8 |
|
|
|
|
DDC10-300A |
300A |
<30mA |
C10 |
|
|
|
|
DDC11-600A |
600A |
<40mA |
C11 |
|
|
|
Hot Tags: 3 phase 3 wire high performance EMI filter, China, manufacturers, suppliers, factory, customized, wholesale, cheap, price, 3 Phase 4 Line EMI RFI Filters
You Might Also Like
Send Inquiry